How to fix a clogged shower head simply

A clogged shower head can be caused by dirt or accumulated sand and soil. Finding the cause will help you have a suitable solution, save time, reduce inconvenience and discomfort.

How to fix a clogged shower head simply

The main cause of a clogged shower head is a clogged water jet or filter. In areas where the water source contains a lot of alum and lime minerals, the minerals will gradually settle and form deposits on the shower head, which will cause the shower head to become clogged over time.

In addition, not cleaning regularly or properly can also aggravate this condition. Note that small details on the showerhead, such as the small water jets, also need to be cleaned regularly to prevent the accumulation of residue and bacteria. Otherwise, the showerhead will quickly clog when the water source contains a lot of minerals.

Some simple ways to fix a clogged shower that you can refer to:

Remove and clean clogged showerhead

If you shake and see sand or dirt stuck inside the shower head, you need to remove the nozzle to clean it.

First, turn off the water supply to ensure no water is running through the showerhead; use a tool such as an extension tube or screwdriver to remove the showerhead from the water pipe. Use an old toothbrush to clean the inside to remove dirt, grime, and any other debris that may be trapped inside, then rinse the showerhead with clean water.

Additionally, you should check other parts such as filters or membranes and clean them if necessary. Once done, reattach the showerhead to the water pipe and tighten it. Finally, turn on the water supply and check if the showerhead is working properly.

How to fix a clogged shower head simply with vinegar and baking soda

Dissolve 1/2 cup baking soda in 1 cup vinegar to create a powerful cleaner that helps remove showerhead residue.

Pour the mixture into a plastic bag and cover the shower head so that the mixture covers the entire head; secure the mixture and the shower head with a rubber band.

Soak the showerhead in the solution for about 24 hours to let the detergent clean the dirt in the drain hole. Finally, use a toothpick to clean the small holes on the faucet head for best results.

Use lemon and vinegar

Dissolve the juice of one lemon in 300ml of vinegar. Lemon and vinegar mixed together immediately create a powerful cleaning agent that helps remove dirt and rust stains.

Put the vinegar and lemon solution in a nylon bag and tie it tightly, securing it to the shower head, so that the mixture covers the entire shower head.

Soak for about 30 minutes or 1 hour, depending on how much dirt is stuck. Then, take the shower head out and use a brush to scrub the dirt off, turn on the water so that the water pressure pushes all the dirt out.

How to fix a clogged shower head simply with vinegar and toothpaste

Pour white vinegar into a plastic bag and cover the showerhead with vinegar until it covers the entire head. Soak for 30 minutes or longer if the buildup is heavy.

After soaking, remove the vinegar bag from the showerhead and apply a layer of toothpaste to the showerhead. Toothpaste contains abrasives that help remove plaque and dirt from the faucet.

Reinstall the shower head after cleaning it and turn on the water to test it again. The water jets will push out any remaining dirt, preventing the shower from clogging again.

Use a brush and vinegar

Pour 1/2 cup of white vinegar into a plastic bag, place the showerhead in it, tie it with a rubber band and let it soak for about 30 minutes. Then, remove the vinegar bag and use a toothbrush to clean the showerhead, removing any remaining dirt.

Use a soft cloth and water to clean the showerhead, keeping the faucet open to allow the water pressure to push away any remaining dirt.