How to properly drain gasoline from motorbikes and cars

Refueling motorbikes:

1. Turn off the engine and turn on the turn signal:Make sure the motorcycle engine is completely off before draining the gas. Turn on the turn signals to warn road users.

2. Choose a safe location:Move the vehicle to a safe place, away from open flames and sources of high heat.

3. Turn off cell phones and electronic devices:Avoid creating sparks that may cause fire or explosion.

4. Open the lid and place it in a safe place:Open the gas cap gently and place it in a safe place away from sparks.

5. Use specialized tools:Use the fuel siphon and spare fuel can to safely drain fuel.

6. Drain the gas carefully:Drain gasoline from the gas tank by transferring gasoline from the motorcycle tank to the spare tank through a specialized gas suction hose.

7. Close the fuel tank cap properly:Make sure the fuel tank cap is closed tightly after draining fuel.

Gasoline for cars:

1. Turn off the engine and open the car door:Turn off the engine and open the car doors to reduce the risk of gasoline spilling into the engine compartment.

2. Park in a safe place:Park the vehicle in a safe place, away from fire and high heat sources.

3. Open the fuel tank cap:Open the gas cap gently and place it in a safe place.

4. Use specialized tools:Use a dedicated fuel siphon and spare fuel tank to safely drain fuel.

5. Drain the gas carefully:Slowly and carefully drain the gas from the vehicle's gas tank into the spare tank.

6. Close the gas cap properly:Make sure the gas cap is closed tightly after draining the gas.

Drain fuel from the fuel drain valve

Both car and motorbike fuel tanks are equipped with a fuel drain valve. In this case, you just need to use a 2-sided screwdriver and determine the correct location of the drain pipe. The specific steps are as follows:

Step 1:Place a plastic bottle or container of gasoline under the fuel tank drain valve.

Step 2:Look at the position near the fuel tank lock and you will see a 2-sided screw. This is the position that needs to be impacted to drain the fuel;

Step 3:Turn the screw counterclockwise to let the gas flow out;

Step 4:Turn it back firmly to lock the fuel drain pipe when the required amount of fuel has been taken up.